A 1-inch gas riser is typically a pipe assembly or fitting that brings a gas line above ground, but the products listed here do not include a dedicated 1-inch gas pipe riser. The Eastman product is a gas shutoff valve; the other listings are motorcycle or furniture risers. The Eastman valve is the closest match for gas plumbing, while the remaining products should not be used as gas-line components. Confirm pipe type, connection size, and local code requirements before buying.
| Product | What It Is | Best Fit |
|---|---|---|
| Eastman 1-Inch FIP Ball Valve | Gas shutoff valve | In-line gas flow control, if connections match |
| F FIERCE CYCLE Tank Lift Kit | Motorcycle gas tank lift | Harley-Davidson tank positioning |
| KEMIMOTO Handlebar Risers | Motorcycle handlebar risers | Compatible 1-inch handlebars |
| ANNKUT Bed Risers | Furniture risers | Raising furniture |
| KOIKEY Wooden Risers | Furniture risers | Furniture needing a short lift |
Eastman 1-Inch FIP Straight Gas Ball Valve
This is the most relevant listed product for a gas-line project, but it is a shutoff valve—not a riser. Its 1-inch FIP connection is intended for an in-line connection between pipes running in the same direction. The product information states it is designed for LP gas, liquefied petroleum, and air mixtures up to 175 PSI.
Best for: Buyers seeking an in-line gas shutoff valve, provided the existing piping and connection requirements match. The quarter-turn aluminum lever is intended for on-and-off control.
Limitation: It does not raise a gas line above ground or replace a riser assembly. Verify gas type, pressure, thread compatibility, and applicable installation rules before use.
F FIERCE CYCLE Motorcycle Gas Tank Lift Kit
This steel replacement lift kit is for raising a motorcycle gas tank, not a gas supply pipe. It is the closest listing to the phrase “gas riser” because it lifts a gas tank, but its use is automotive rather than plumbing.
Best for: Harley-Davidson owners looking for a motorcycle tank lift kit. Choose it only when the intended job is tank positioning and the motorcycle fitment is confirmed.
Limitation: The provided product information does not specify detailed fitment, dimensions, or installation instructions. Do not use it on a household or commercial gas line.
KEMIMOTO 1-Inch Motorcycle Handlebar Risers
These risers lift motorcycle handlebars; they are not gas-pipe fittings. The listed material is forged 6061 T-6 aluminum. The stated hole diameter is 25 mm, or 1 inch, and the listing describes use with motorcycles, ATVs, and dirt bikes that have matching handlebars.
Best for: Riders who need handlebar-height adjustment and have measured a 1-inch handlebar. It is included because “1-inch riser” appears in the product description, not because it is suitable for gas plumbing.
Limitation: Measure the handlebar diameter and check the product dimensions before ordering. Avoid this product for any gas-line installation.
ANNKUT 1-Inch Heavy-Duty Bed Risers
These are furniture supports rather than gas risers. The set is described as having an L-shaped design, non-slip features, and a stated total support capacity of 5,000 pounds. The listing says the half-wrapped edge fits furniture legs smaller than 3.7 by 3.7 inches.
Best for: Buyers raising a bed, sofa, desk, or other furniture by about an inch, where the leg shape fits the design.
Limitation: The stated capacity and intended use relate to furniture, not gas piping. Do not substitute these supports for a listed plumbing component.
KOIKEY 1-Inch Wooden Furniture Risers
These solid oak trapezoidal blocks are intended to lift furniture. The listed height boost is 0.88 inch, and the set includes felt pads to help protect floors and reduce noise when furniture moves. The product description says the risers cannot be stacked for height adjustment.
Best for: Home or office buyers who need a small, fixed furniture lift and prefer wooden supports.
Limitation: The fixed height cannot be adjusted by stacking, and the product is not a gas-line riser or fitting.
Buying Guide: How To Choose A 1-Inch Gas Riser
Are you looking for a pipe riser or a different kind of riser?
“Riser” can refer to a gas-piping assembly, a motorcycle tank or handlebar lift, or a furniture support. Identify the application first. Of the five listings above, only the Eastman item is a gas plumbing component, and it is a shutoff valve—not a riser.
What should you check for a gas-line fitting?
Confirm the nominal pipe size, connection type, gas service, pressure rating, and whether the component is approved for the intended installation. A 1-inch label alone does not confirm that threads or end connections will fit. Follow local code and the instructions for the piping system; consult a qualified gas professional when required.
When is a dedicated riser necessary?
A true gas riser is selected for the specific piping material, installation location, and transition between underground and aboveground piping. The supplied listings do not provide a dedicated riser assembly. Search for a purpose-built gas piping riser that matches the system rather than adapting a valve or unrelated lift product.
Frequently Asked Questions
Is the Eastman valve a 1-inch gas riser?
No. It is a 1-inch FIP straight gas ball valve for in-line shutoff; it does not raise a gas line above ground.
Can furniture risers support a gas pipe?
No. The ANNKUT and KOIKEY products are designed for furniture, not gas-piping service.
Does “1 inch” guarantee a fitting will fit my pipe?
No. Check the actual nominal size, thread type, connection style, and system requirements before purchasing.
What should I buy for a 1-inch gas riser installation?
Choose a purpose-built gas riser that matches the piping material, service, and local requirements. None of the listed products is identified as a dedicated gas pipe riser.