For true 8/4 cherry lumber, look for stock sold at a nominal two-inch thickness; the listed products below are useful cherry alternatives, but none is described as 8/4. The 3/4-inch boards are better for panels, crafts, and smaller builds, while the square blanks are sized for turning. Check the listed dimensions before buying, especially if your project requires thick, wide boards that can be milled down.
| Product | Listed dimensions | Best suited for |
|---|---|---|
| Cherry solid hardwood board | 3/4″ x 8″ x 36″ | Longer craft and woodworking pieces |
| Surfaced cherry board | 3/4″ x 8″ x 12″ | Short projects needing four surfaced sides |
| Barrington 3/4″ x 2″ strips | Four pieces, 48″ long | Narrow components and trim-like parts |
| Barrington 2″ square blanks | Four pieces, 8″ long | Short turning projects |
| Barrington 1.5″ square blanks | Four pieces, 12″ long | Smaller turning projects |
Cherokee 3/4-Inch Cherry Hardwood Board
This unfinished solid cherry board measures 3/4 inch thick, 8 inches wide, and 36 inches long. Its listed uses include crafts, DIY woodworking, scroll-saw projects, and laser engraving. Its 36-inch length offers more reach than the 12-inch surfaced board, making it a better fit when a project calls for a longer blank.
Best for: Woodworkers and makers who need a relatively long, wide piece of unfinished cherry for cutting or shaping. It was selected for its useful 8-inch width and 36-inch length. Limitation: At 3/4 inch thick, it is not a substitute for 8/4 stock.
WOODNSHOP Surfaced Cherry Board
This cherry board is listed as 3/4 by 8 by 12 inches and surfaced on all four sides. The seller notes that the measurements may vary by up to 1/4 inch in length and width. The listing also describes other thickness, width, and length options, so verify the selected configuration before ordering.
Best for: Buyers who want a short board with all four sides surfaced for a small woodworking project. Choose it if a 12-inch length suits your layout and ready-surfaced dimensions matter. Limitation: The listed measurement tolerance means it may not match a precise cut list without checking and trimming.
Barrington 3/4-Inch Cherry Strips
This set contains four cherry pieces listed at 3/4 inch by 2 inches by 48 inches. The narrow width and long length suit projects that need repeated strips or slender components rather than a single broad panel.
Best for: Makers who need several long, narrow cherry pieces for small parts or project components. It was selected because the four-piece format and 48-inch length offer a different use case from the wider boards. Limitation: These strips are only 3/4 inch thick, so they do not meet an 8/4 thickness requirement.
Barrington 2-Inch Cherry Turning Blanks
This four-piece set contains square cherry turning blanks measuring 2 by 2 by 8 inches. The square cross-section is distinct from the flat board stock in this list and makes the blanks the most directly suited option here for short turning work.
Best for: Turners who need short, square cherry blanks for small projects. Choose this set over flat boards if the 2-inch square shape fits the workpiece. Limitation: Each blank is only 8 inches long, and the product is not a long board for furniture parts or wide panels.
Barrington 1.5-Inch Cherry Turning Blanks
This set includes four square blanks measuring 1.5 by 1.5 by 12 inches. Compared with the 2-inch-square blanks above, these pieces have a smaller cross-section and are listed at a longer length.
Best for: Turners whose project calls for a 1.5-inch square blank and a 12-inch length. It was selected as the smaller-section alternative to the 2-inch blanks. Limitation: Its listed size is specialized for turning and does not provide the width or thickness of 8/4 board lumber.
Buying Guide: Choosing Cherry Lumber
What does 8/4 cherry lumber mean?
In lumber sizing, 8/4 refers to a nominal thickness of eight quarters, or two inches. The finished thickness may be less after surfacing, so check whether a seller describes rough or surfaced dimensions. The products listed here are specified as 3/4-inch boards or square turning blanks, not 8/4 boards.
Should you buy a board or a turning blank?
Choose flat board stock when you need a panel, strip, craft blank, or piece to cut to shape. Choose a square turning blank when the project needs a compact, square starting piece for turning. Compare both cross-section and length to your planned finished part.
How should you compare dimensions and preparation?
Read thickness, width, and length separately. A wider board does not replace thicker stock, and a square blank is not interchangeable with a flat board. Also check whether the wood is unfinished or surfaced. The WOODNSHOP listing notes that its measurements can vary by up to 1/4 inch in length and width, so allow for that when planning precise cuts.
When should you look beyond these options?
If your project specifically requires 8/4 cherry, search for stock explicitly described as 8/4 or nominal two-inch thickness. Confirm the actual thickness, board width, length, and surfacing status with the seller before ordering. These listed options can suit smaller projects, but none is presented as a full-size 8/4 board.
Frequently Asked Questions
Is any product here true 8/4 cherry lumber?
No. The listed boards are 3/4 inch thick, and the other products are square turning blanks. None is identified as 8/4 stock.
Which option is best for a long, flat piece?
The Cherokee board is listed at 3/4 by 8 by 36 inches, making it the longest flat board described in the product list.
Which option is best for turning?
The Barrington square blanks are the turning-focused choices. Select the 2-inch-square or 1.5-inch-square set according to the size and length your project requires.
What does surfaced on all four sides mean in this listing?
The WOODNSHOP product is described as surfaced on all four sides. Its listing also gives a measurement tolerance of up to 1/4 inch in length and width, so confirm dimensions for projects requiring close-fitting parts.
Can these boards be used for a project that calls for two-inch-thick cherry?
Not as listed. The board products are 3/4 inch thick, and the turning blanks have different square dimensions. Look for lumber explicitly sold as 8/4 if the project requires nominal two-inch stock.