The best clawfoot tub faucet with a shower diverter depends on your tub’s faucet spacing and shower connection. The Bathcock kits are options for buyers seeking a traditional-style diverter with adapter fittings; the porcelain-handle kit adds a decorative look. The My PlumbingStuff B3100 is a replacement faucet, but its listed features do not specify a shower diverter. A separate modern shower system is included for comparison, though its details do not establish clawfoot-tub compatibility.
| Product | Best For | Key Detail |
|---|---|---|
| Bathcock Clawfoot Tub Shower Diverter Kit | Traditional-style replacement | Chrome finish and adapter fitting |
| Clawfoot Add-A-Shower Bathcock Diverter | Porcelain-handle styling | Chrome finish and adapter fitting |
| My PlumbingStuff B3100 | Clawfoot faucet replacement | Two handles and ceramic cartridges |
| YAWWALK Shower System | Built-in shower-system comparison | Three-way diverter |
| Barclay Chrome Clawfoot Diverter Faucet | Clearly marked shower handle | Three porcelain levers |
Bathcock Clawfoot Tub Shower Diverter Kit
This kit is best for someone replacing a traditional bathcock and adding a shower connection to a clawfoot or roll-top tub. Its listed construction is solid brass with a polished chrome finish, and the design has 3-3/8-inch centers. The product information describes it as suitable for many cast-iron, rolled-top, and clawfoot-style freestanding tubs.
A 3/4-inch MIP inlet and included 3/8-inch-to-1/2-inch MIP reducer adapter are listed. The adapter is intended to accommodate the specified shower-riser or shower-hose connections. Choose this option if those measurements match your plumbing. Check your existing inlet and outlet before ordering; “most” bathtub compatibility does not guarantee a fit for every installation.
Clawfoot Add-A-Shower Bathcock Diverter
This is best for buyers who want a traditional bathcock diverter with porcelain lever handles. Like the first kit, it is described as a solid-brass faucet with a polished chrome finish, 3-3/8-inch centers, and a 3/4-inch MIP inlet. The listed reducer adapter supports the stated 3/8-inch riser and 1/2-inch shower-hose connections.
The porcelain handles distinguish this model’s appearance from the first Bathcock option. It is presented for traditional, cast-iron, rolled-top, and clawfoot-style tubs. Choose it if the handle design suits your bathroom and the measurements match your plumbing. The product details do not specify a shower riser or hose as included, so confirm which components are supplied before planning installation.
My PlumbingStuff B3100 Clawfoot Faucet
The B3100 is best for buyers seeking a clawfoot faucet replacement with separate hot and cold controls. Listed features include 3-3/8-inch centers, ceramic cartridges, a polished chrome finish, and a 3/4-inch male IPS inlet. The manufacturer says it is intended for its products and can also be used on many cast-iron, rolled-top, and clawfoot-style tubs.
Its two-handle design allows separate hot- and cold-water adjustment, and the listed diverter technology is a 1/4-turn ball valve. However, the product features do not clearly describe a shower outlet or shower connection. Choose it only after confirming that its configuration matches your intended shower setup; avoid assuming it includes all parts needed to add a shower.
YAWWALK Three-Way Shower System
This system is best for buyers comparing a complete modern shower-and-tub arrangement rather than a clearly specified traditional clawfoot bathcock. Its listed three-way diverter switches among a 10-inch rainfall head, handheld shower, and tub spout. Other stated features include a pressure-balanced valve, solid-brass valve, ceramic cartridge, and brushed-gold finish.
The product information describes a tub spout with a listed flow of up to 2.5 GPM. However, it does not state that the system fits clawfoot-tub faucet holes, uses 3-3/8-inch centers, or connects to the bathcock fittings described above. Choose it only if your project uses a compatible built-in shower-system layout; avoid treating it as a direct clawfoot faucet replacement without confirming installation requirements.
Barclay Chrome Clawfoot Diverter Faucet
This Barclay faucet is best for buyers who want separate controls clearly labeled for hot, cold, and shower. Its listed features include three porcelain lever handles, 3-3/8-inch centers, compression stems, and 1/4-turn operation. These details make it a useful comparison for a traditional clawfoot-tub installation where a dedicated shower handle is desired.
The available product information does not specify inlet dimensions, included adapters, or the shower outlet connection type. Check those details against your plumbing before choosing it. It may be a better match for someone prioritizing a labeled shower control than someone who needs a specifically documented adapter configuration.
Buying Guide: How To Choose A Clawfoot Tub Faucet With Diverter
Which measurements should you check?
Measure the faucet-center spacing and identify your existing inlet size and connection type. Several products here list 3-3/8-inch centers, but that does not establish that every tub or plumbing setup will fit. Compare the faucet’s stated inlet and outlet details with your actual fittings before purchase.
What kind of shower connection do you need?
Determine whether your setup uses a shower riser or a shower hose. The Bathcock kits list a 3/4-inch MIP inlet and an adapter for the specified 3/8-inch or 1/2-inch connection options. The Barclay listing does not provide equivalent connection details, so verify them separately.
Should you prioritize handles or valve features?
Choose porcelain levers if their traditional appearance and separate controls suit your bathroom. For operating details, the B3100 lists ceramic cartridges and a 1/4-turn ball-valve diverter, while Barclay lists compression stems and 1/4-turn operation. Compare only features relevant to your preferred controls and replacement needs.
How can you avoid buying an incompatible faucet?
Do not rely on broad terms such as “universal” alone. Verify the faucet spacing, inlet, diverter outlet, and whether adapters or shower components are included. A conventional shower system may have a diverter but still lack the mounting and connections needed for a clawfoot tub.
Frequently Asked Questions
What is a clawfoot tub faucet diverter?
A diverter directs water from the tub spout to a shower connection. The exact operation and compatible shower setup depend on the faucet’s design.
Are 3-3/8-inch centers standard for every clawfoot tub?
No. Several products list 3-3/8-inch centers, but you should measure your tub’s faucet connections rather than assume that spacing.
Do these faucets include a shower riser or shower hose?
The supplied product details do not confirm that a riser or hose is included. Check the product’s current package contents before buying.
Can any tub-and-shower system replace a clawfoot bathcock?
No. A system with a diverter may use a different installation layout. Confirm its mounting, spacing, and plumbing connections for your specific tub.
Which option has an explicitly labeled shower handle?
The Barclay faucet lists three porcelain handles labeled hot, cold, and shower. Verify its connection details before selecting it.