For decorative flakes on epoxy floors, choose by coverage needs, flake size, color blend, and the look you want. The 40-pound SIMIRON boxes are better suited to larger projects, while the 1-pound blend is a smaller-quantity option. Fabbay offers a 12.4-pound black, white, and gray mix; Taiyin provides larger 6–8 mm pieces. Compare the product details below, then check the coating manufacturer’s instructions for application and coverage requirements.
| Product | Listed amount | Best suited for |
|---|---|---|
| Black, White, Blue, and Gray Blend | 1 lb | Small projects or accents |
| Fabbay Black, White, and Gray | 12.4 lb | Mid-size projects needing a neutral blend |
| SIMIRON FB-411 Domino Blend | 40 lb | Larger residential or commercial areas |
| Taiyin Black, White, and Gray | 6.17 lb | A more noticeable, larger-flake look |
| SIMIRON FB-310 Orbit Blend | 40 lb | Larger projects with a different blend choice |
Black, White, Blue, And Gray Blend
This 1-pound package contains a mix of black, white, blue, and gray flakes. The listed pieces measure approximately 3–5 mm, giving the blend a relatively subtle texture compared with the larger flakes in this selection. The product describes the material as natural rock particles and says the chips can help conceal scratches, stains, and minor surface imperfections.
Best for: Small areas, accents, or buyers seeking a cooler multicolor blend in a modest package. It was selected for its distinct blue color option and smaller flake size.
Consider: One pound may not be enough for a large floor. The product details do not specify coverage, so estimate requirements using the coating system’s instructions before starting.
Fabbay Black, White, And Gray Flakes
Fabbay’s package weighs 12.4 pounds and combines black, white, and gray chips. The listed flake size is approximately 2–4 mm, making these smaller than the 6–8 mm Taiyin option. The product identifies the chips as natural rock and describes them as sturdy and resistant to fading.
Best for: Buyers who want a neutral mix and more material than a small sample-size package provides. It was selected as a middle-quantity option for projects where a classic monochrome appearance is preferred.
Consider: The listed colors are limited to black, white, and gray. No coverage rate is supplied, so the package weight alone cannot confirm how much floor it will finish.
SIMIRON FB-411 Domino Blend
This 40-pound box contains SIMIRON’s FB-411 Domino Blend in a listed 1/4-inch size. The product is described for residential, commercial, and industrial flooring applications, including garages, basements, laundry rooms, and showrooms. Its decorative chips are intended to add visual texture and help hide concrete imperfections.
Best for: Larger flooring jobs or buyers who need a substantial quantity in one blend. It was selected for its stated range of application settings and box size.
Consider: A 40-pound box may be more material than a small room or accent project requires. The listing does not provide a coverage figure, so confirm the quantity needed for your chosen application method.
Taiyin 6–8 Mm Black, White, And Gray
Taiyin’s package weighs 6.17 pounds and includes black, white, and gray rock flakes measuring about 6–8 mm. That larger size can create a more visible chip pattern than the 2–5 mm options in this list. The product says the flakes can help cover marks and dirt on floors and walls.
Best for: Buyers who want larger pieces and a more pronounced decorative effect without choosing a 40-pound box. It was selected because its stated size stands apart from the smaller-chip options.
Consider: The larger flakes may not match a preference for a fine, understated finish. Check the coating manufacturer’s application guidance to confirm the selected flake size is suitable.
SIMIRON FB-310 Orbit Blend
This SIMIRON option is a 40-pound box of FB-310 Orbit Blend flakes, listed at 1/4-inch size. The product is presented for residential, commercial, and industrial floors, with garages, basements, laundry rooms, and showrooms named as common settings. The chips are described as a way to customize a floor’s appearance and conceal concrete imperfections.
Best for: Larger projects where a 40-pound quantity and the Orbit Blend are a better fit than a small mixed-color package. It was selected as a second high-quantity option for buyers comparing blend choices.
Consider: The supplied details do not identify the blend’s individual colors. Review the product’s color presentation before selecting it for a specific room palette.
Buying Guide: How To Choose Decorative Epoxy Flakes
How much flake should you buy?
Start with the floor’s measured area and the application rate recommended for your epoxy coating system. The product details here do not give coverage rates, and package weight alone is not enough to calculate finished coverage. For a small project, a smaller package may be easier to manage; for a larger job, compare the 40-pound boxes and confirm the required amount before purchase.
Which flake size creates the right appearance?
Smaller flakes, such as the listed 2–5 mm options, generally provide a finer-looking pattern than 6–8 mm or 1/4-inch chips. Choose a larger listed size if you want the chips to stand out more. Always check the coating manufacturer’s guidance, since the appropriate application can depend on the full floor system.
How should you compare color blends?
Consider the room’s existing colors and the visual effect you want. The 1-pound blend includes blue alongside black, white, and gray, while Fabbay and Taiyin list neutral black, white, and gray mixes. SIMIRON offers Domino and Orbit blend choices, but the supplied details do not enumerate their colors.
What else should you check before applying flakes?
Confirm that the flakes are intended for the coating and application method you plan to use. Follow instructions for surface preparation, broadcasting, and any clear topcoat from the coating manufacturer. Do not assume that decorative chips alone provide a complete floor coating system.
Frequently Asked Questions
Do decorative flakes hide concrete imperfections?
Several listed products describe their flakes as helping conceal marks, stains, scratches, or other minor imperfections. They are decorative chips, so do not treat them as a substitute for preparing or repairing the concrete.
Are these flakes available in different sizes?
Yes. The listed options range from approximately 2–4 mm and 3–5 mm to 6–8 mm and 1/4 inch. Check the size stated for the specific product before choosing.
Can epoxy flakes be used outside?
One product describes its flakes for interior and exterior decorative use. For other options, confirm outdoor suitability with the product details and the coating manufacturer before applying.
Which option is best for a large floor?
The two 40-pound SIMIRON boxes are the largest packages listed. Calculate the needed quantity using the coating system’s coverage instructions, since the product details do not state a coverage rate.
Do the flakes replace epoxy coating?
No. The products are decorative flakes or chips for use with floor coatings. Follow the coating system’s instructions to determine the required primer, base coat, and finish coat.