Gold kitchen hardware can add warmth and contrast to cabinets while updating the room without replacing the cabinetry. The options below include brushed-gold pulls in 5-inch and 6-1/4-inch hole-center sizes, plus a 30-pack with rounded stainless-steel handles. Amerdeco’s 10-packs are suited to smaller updates, while the larger packs can work better for kitchens with many drawers and doors. Measure existing holes before choosing a pull.
| Product | Pack size | Hole centers | Best for |
|---|---|---|---|
| Amerdeco Brushed Gold Pulls | 10 | 5-inch listing | Small cabinet updates |
| Amerdeco ZH0019 Pulls | 10 | 5 inches (128 mm) | Matching cupboard and drawer hardware |
| Lepatape Brushed Gold Pulls | 10 | 6-1/4 inches (160 mm) | Larger existing holes |
| Asimerdeco Brushed Gold Pulls | 30 | 5 inches (128 mm) | Whole-kitchen projects |
| Plustool Brushed Brass Handles | 30 | 3 inches (76 mm) | Smaller-spaced holes |
Amerdeco 10-Pack Brushed Gold Pulls
This Amerdeco set is best for a smaller kitchen refresh or for replacing a limited number of matching handles. The product name identifies a 10-pack with a brushed-gold finish and a 5-inch size. That makes it a potential match for cabinet doors and drawers with compatible existing spacing.
Choose this if a 10-piece quantity suits the project and the listed measurement matches the cabinet holes. The provided product information does not specify material or screw sizes, so confirm those details on the product listing before ordering. Avoid relying on appearance alone: measure center to center between the current mounting holes.
Amerdeco ZH0019 10-Pack Cabinet Handles
This set is best for buyers seeking a defined 128 mm hole-center measurement in a 10-pack. The listing describes brushed-gold pulls for kitchen cabinets, cupboards, and drawers, giving buyers several furniture applications to consider. Its 5-inch measurement is stated as the hole-center size.
Choose this option when the measured distance between mounting holes is 128 mm and a smaller quantity is sufficient. The supplied product details do not state the material or included screw dimensions. Check the listing for installation details, and avoid it if your existing holes have a different spacing.
Lepatape 6-1/4-Inch Brushed Gold Pulls
Lepatape’s 10-pack is best for cabinets with wider hole spacing. The listed hole centers are 6-1/4 inches (160 mm), and the overall length is 6.57 inches (167 mm). The pulls are described as zinc alloy with a brushed-brass finish and are suggested for kitchen cabinets, cupboards, dressers, closets, and other wooden furniture.
Each pull includes two screw sizes: 1 inch and 1.77 inches. The product information says longer screws may be requested, but buyers should confirm availability with the seller. Choose this set if 160 mm matches your holes; avoid it if you need the more common 128 mm spacing.
Asimerdeco 30-Pack Brushed Gold Pulls
This 30-pack is best for larger kitchen projects that need many matching pulls. The product name specifies brushed gold, solid zinc alloy, and 5-inch (128 mm) hole centers. Compared with the 10-packs, its larger quantity may suit a full cabinet refresh or a project that includes multiple drawers and cupboard doors.
Choose this if the 128 mm spacing fits and you want a larger set of matching hardware. The provided information does not identify included screw sizes, so check installation requirements before purchase. Avoid this set if you only need a few pulls or have a different hole pattern.
Plustool 30-Pack Brushed Brass Handles
Plustool is best for kitchens with 3-inch (76 mm) hole spacing and buyers who need a 30-piece quantity. The handles are stainless steel with a brushed-brass finish. Each is listed at 5 inches overall, 1.2 inches high, and 0.4 inches in diameter. The product describes rounded edges and individually wrapped handles.
Choose this model when rounded edges and the 76 mm spacing suit the project. The listed hole centers are shorter than those of the 128 mm options, so measure carefully before selecting it. Do not assume a handle will cover old mounting marks if the new spacing differs.
Buying Guide: How To Choose Gold Kitchen Hardware
Which hole-center measurement do you need?
Measure from the center of one mounting hole to the center of the other. Do not use the pull’s total length as the hole spacing. The products here include 76 mm, 128 mm, and 160 mm options. Matching the existing measurement can help avoid drilling new holes; a mismatch may require cabinet modifications.
Should you choose brushed gold or brushed brass?
Product listings use both finish descriptions. Compare the finish with nearby fixtures, appliances, and lighting, because gold tones can vary across products. If exact coordination matters, review product images and available finish details before buying rather than assuming two “brushed” finishes are identical.
How many pulls should you buy?
Count the doors and drawers that need hardware, then allow for any planned extras. A 10-pack may suit a partial update, while a 30-pack offers more pieces for a larger project. Check the package quantity and whether the listing includes screws; the supplied details vary between these options.
What materials and dimensions matter?
Material affects the product description, while length, height, and diameter help determine how a handle will look and feel on a cabinet. The listed material details include zinc alloy and stainless steel. Compare measurements with the scale of the drawer fronts, and verify screw length against the cabinet thickness and product instructions.
Frequently Asked Questions
What is the most important measurement when replacing cabinet pulls?
Measure the distance between the centers of the existing mounting holes. This is the hole-center measurement and should match the replacement pull.
Can 128 mm pulls replace 160 mm pulls without new holes?
Usually, the mounting holes will not align because the center-to-center distances differ. Confirm the cabinet layout and plan for modification if necessary.
Are brushed gold and brushed brass the same finish?
Not necessarily. These terms can describe similar warm-toned finishes, but the exact color and sheen may differ by product. Compare listing images and finish descriptions.
Which set is suited to a large kitchen update?
The Asimerdeco and Plustool options are both 30-packs. Choose between them based on hole spacing: 128 mm for Asimerdeco or 76 mm for Plustool.
Do all these products include installation screws?
The provided details specify two screw sizes for the Lepatape pulls. Screw information is not provided for every option, so check each product listing before ordering.