Answer: If you want a TV wall mount that pulls out for easy adjustment and better viewing angles, these models are among the best options for 32″ to 95″+ screens. They are ideal for living rooms, bedrooms, and home theaters where viewers sit at varying distances and angles. The top picks cover common TV sizes, solid load ratings, and multiple tilt/swivel ranges to minimize glare and maximize comfort. This guide highlights two- and three-armed mounts with extendable arms, plus one sliding-out design for wide side-to-side movement. A quick comparison table follows to help you decide at a glance.
| Product | |||
|---|---|---|---|
| USX MOUNT, 32-70″ | 32-70″ / 99 lbs | Dual articulating arms, 13.89″ extension | VESA up to 400×400 |
| Mounting Dream, 32-70″ | 32-70″ / 99 lbs | Clear install with pre-labeled hardware | Extension to 17.5″ |
| USX MOUNT, 37-84″ | 37-84″ / 120 lbs | Max 45° swivel, wide tilt range | Heavier unit |
| Perlegear, 42-95″ | 42-95″ / 150 lbs | Centering adjustment up to 85″ height | Not for drywall-only installs |
| Perlegear Sliding, 42-95″ | 42-95″ / 150 lbs | Sliding out for wide reach, strong cargo | Complex installation for some walls |
Use this guide to pick a pull-out mount that best matches your wall type, TV size, and seating arrangement. The selections below focus on models with strong articulation, reliable load ratings, and clear installation paths for typical American home setups.
USX MOUNT Full Motion TV Wall Mount (32-70″)
This universal wall mount fits most 32-70″ TVs up to 99 lbs with VESA patterns from 75x75mm to 400x400mm. It supports 12″/16″ wood studs and can be mounted on concrete or brick. It tilts -12° to +5° and swivels for a flexible viewing angle. The dual articulating arms extend about 13.89″ and retract to 2.59″. Best for medium-sized rooms where a slight extension improves viewing, especially with seating off-center. Limitation: check wall compatibility and ensure proper stud spacing before installation.
Mounting Dream Full Motion TV Mount (32-70″)
This universal mount supports 32-70″ TVs up to 99 lbs with max VESA 400x400mm. It allows +/-3° post-installation leveling, tilts +5°/-15°, and swivels up to ±45° (range varies by TV). It extends up to 17.5″ and retracts to 3.4″, making it easy to pull out for viewing and push back for a neat wall profile. Best for: viewers who need substantial reach and frequent angle adjustments. Caution: verify stud spacing and wall type to avoid mounting issues on non-standard walls.
USX MOUNT Full Motion TV Mount (37-84″)
Designed for 37-84″ TVs up to 120 lbs with VESA up to 600x400mm, this mount offers a wide tilt (-5° to +15°), ±45° swivel, and +/-4° post-installation adjustment. It can extend out to about 15.16″ and retract to 2.74″. Best for larger rooms or tall viewing angles where viewers sit at varied distances. Choose this if you need a taller mounting profile and robust extension; avoid if your wall framing is uncertain or if the TV is near vents or cabinets that limit extension.
Perlegear Full Motion Sliding TV Mount (42-95″)
This wide-compatibility mount fits 42″-95″ TVs up to 150 lbs with VESA 200x100mm to 600x400mm. It supports 12″/16″/24″ wood studs, concrete, or brick walls, and should not be mounted on drywall alone. It can shift horizontally to center the TV, reducing neck strain and accommodating varied stud layouts. Best for: rooms with non-standard stud spacing or needs to re-center after installation. Limitation: installation may be more involved on older walls; ensure proper anchors for concrete or brick.
Mounting Dream Full Motion TV Mount (42-90″)
This Mounting Dream model tilts 5° up and 15° down, and swivels left or right to match seating position. It extends to about 16.6″ and retracts to 2.5″. It uses cold-formed steel for strong support up to 100 lbs, with +/-4° post-installation adjustment for precise leveling. Best for: standard living rooms with mid-sized TVs and a need for flexible viewing angles. Caution: check wall structure to ensure compatibility with concrete anchors if needed.
Buying Guide
Key purchase considerations include TV size, weight, VESA pattern, wall type, and viewing distance. Ask these practical questions:
- What is the largest TV and its weight I plan to mount? Look for a mount with at least that capacity.
- What is the wall type (wood studs, concrete, brick)? Confirm the mount supports that surface and consider anchors.
- How far out do I want the TV to extend? Choose a model with the desired extension and a reliable retraction.
- Do I need a wide swivel range or a specific tilt extent to reduce glare?
- Is horizontal centering important due to irregular stud spacing? Consider a mount with horizontal shifting capability.
FAQ
- Can these mounts fit on wood studs only? Many models support 12″ and 16″ stud spacing; verify your wall type.
- Do they require assembling tools? Yes; most include hardware and a template for alignment.
- Is too much extension a problem? Extension improves viewing angles but may place weight farther from the wall; ensure wall strength.
- Are these mounts UL or safety certified? Some models mention load ratings and safety design; verify product specifics.
- Can I adjust TV level after installation? Most offer post-installation leveling to minimize tilt misalignment.